J/222E Specs

 

Hull & Deck Construction

 

· SCRIMP infusion molded sandwich construction

· Uni-and multi-directional fibreglass fabrics

· Low density light weight balsa core

· Vinylester infusion resin

· 10 year anti-osmosis warranty and a 5 year structural warranty

· Bonded overlapped hull-to-deck joint

· Infused structural grid and mast step

· SCRIMP infusion molded, main bulkhead.

 

Keel & Rudder

 

· Low VCG keel with encapsulated cast iron fin & lead bulb

· Keel is bolted & bonded to shallow sump

· High aspect ratio composite rudder

· Uni and multi-directional fibreglass fabrics

· Stainless steel rudder stock

· Self-aligning performance rudder bearings

 

Spars & Rigging

 

· Carbon fiber mast with double swept spreader configuration

· Aluminium racing boom

· Pre-molded mast wedge system

· Adjustable mast step

· Discontinuous rod standing rigging

· Hydraulic backstay adjuster with panel on steering pedestal

· Jib furling system with below deck furler drum

· Carbon fiber retracting bow sprit

· Solid boom vang with purchase

· Complete running rigging package

 

Deck Hardware

 

· Harken winches & deck hardware

· Belowdeck 2:1 mainsheet system

· Floor mounted mainsheet traveller

· Adjustable jib tracks including 8:1 adjustable purchase

· Custom stainless steel shroud and backstay chainplates

· Bow and stern mooring cleats

· Bow anchor locker

· Overhead ventilation hatches for head, forward cabin, head & main salon

· Opening portlights for head, forward cabin, head, main salon & aft cabins

· Exhaust vent openings in main cabin overhead below seahood

· Bow & stern rails & stanchions supported double lifelines

· Cabin top handrails

· Aluminum racing wheel with leather cover

· Compass on wheel pedestal with stainless binnacle guard

· Acrylic companionway washboard with lock, stored in aft cockpit locker

· Emergency tiller

 

Auxiliary Power

 

· Volvo D2 40 HP Saildrive diesel engine & 115 AH alternator

· Volvo engine controls & fuel guage recessed in cockpit with acrylic protection

· 35 gallon aluminum fuel tank

· Sound insulated engine compartment, ventilation pipes

· Two-blade folding propeller

 

Systems

 

· Manual & Electric bilge pumps

· Pressurized fresh water system with Hot water tank (5 gallon)

· Fresh water tank (42 gallon)

· DC refrigeration

· Marine toilet with holding tank system and pump out

· Two 80 AH AGM type batteries & one 70 AH battery for engine

· 12V Electrical distribution panel

· 110V distribution panel, main circuit breaker and inlet

· Halogen head & cabin lighting package

· Low voltage LED navigation lights, mast steaming and mooring lights

· Grounding system for protection against lightning

· Battery charger

 

Interior

 

· Choice of layout options: 3 cabin or 2 cabin (see illustration above)

· Cold-molded, solid, and laminated mahogany wood, finished in satin varnish

· White wood effect on hull in main cabin, vinyl lining on hull in sleeping cabins

· Cored and insulated doors to all cabin areas

· Molded & enclosed head area forward with shower, storage, large sink

· Forward cabin V-berth with locker & shelf storage with great ventilation

· Main salon area with settee berths, table, lockers, safety handrails

· Large galley with double sink, LPG stove/oven, and plenty of outboard storage

· Nav station with chart and gear storage, drawers & panel for electronics

· Aft cabins with large double berths, storage lockers and shelves, and portlights

· Offshore protected companionway with handrails and angled ladder treads

 

JK3 San Diego

2330 Shelter Island Dr

San Diego, CA 92106

619-224-6200

JK3 Los Angeles

4514 Spencer Street

Torrance, CA, US, 90503

310-717-0775

JK3 San Francisco

1070 Marina Village Parkway

Alameda, CA 94501

510-227-2100

JK3 Seattle

1500 Westlake Ave

Seattle, WA 98109

206-285-6200

  • Facebook - Grey Circle
  • Twitter - Grey Circle
  • YouTube - Grey Circle
  • Pinterest - Grey Circle
  • Instagram - Grey Circle

© 2015 JK3 Nautical Enterprises,